3M Scotchcast Resin Cable Joints, Resin Jointing Kits, Premium Inline

3M Scotchcast Resin Cable Joints for LV Cables up to 1.9kV / 3.3kV

3M Scotchcast Resin Cable Joints - LVI-2 and 92-NBA

3M Cable Joint Kits for LV Armoured SWA and Unarmoured Non-SWA Cables

3M Scotchcast Premium Resin Joints signify the release of Low Voltage Cable Jointing products that offer new features to jointers working with LV Cables. These joints feature 3M Scotchcast premium resin compound for specialist high humidity applications. The resin joints have been developed by 3M to make the installation procedure much easier as well as safer while looking to reduce jointing time and cost for the installer but ensuring the quality and not to mention dependability associated with 3M Scotchcast Joints.

The single mould body construction of the Scotchcast Premium Resin Joint features an innovative seal together with fastener clips. These unique features result in an easier installation process while removing the need for extra taping and lowering the possibility of resin leakage from the joint. The high quality foam seals at every finish in the mould body are range taking and therefore eliminate the need for sawing and taping, again reducing installation time. The fully integrated resin delivery technique considerably reduces the chances of resin wastage, contact with skin and inhalation of any vapours.

3M Scotchcast Resin Joints LVI-2 and 92-NBA Series

For Jointing Armoured and Unarmoured Cables

Scotchcast Resin Cable Joints LVI-2 Series

For Jointing XLPE / PVC / SWA Cables

These Scotchcast Joint Kits are for Multi Core Low Voltage Armoured Cables with Polymeric Insulation up to and including 1.9kV / 3.3kV. The LVI-2 Resin Joints replace the Scotchcast LA Series Resin Jointing Kits.

Scotchcast Resin Cable Joints 92-NBA Series

For Jointing XLPE / PVC Cables

These Scotchcast Joint Kits are for Single Core up to 5 Core Low Voltage Non shielded Un-Armoured Cables with Polymeric Insulation up to and including 1.9V / 3.3kV

These joints are also suitable for Single Core Airfield Ground Lighting Cables rated to 6kV with the use of additional components.

Note: The blue colour shown in the image above is not representative of the actual Scotchcast Resin Joint described. The image is for illustration purposes only and the joints are supplied with translucent Scotchcast shells.


© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media