Abtech ATEX Hazard Area GRP Enclosures Zone 1 Zone 2 (BPG)

Abtech ATEX Hazard Area GRP Enclosures Zone 1 Zone 2 (BPG)

Glass Reinforced Polyester Ex Enclosures

Abtech Zone 1 and Zone 2 Hazardous Area Junction Boxes

The benefit of the Glass Reinforced Polyester material used in the Abtech BPG range of Junction Boxes is that it is highly resistant to contamination from oils, fats, aliphatic and aromatic carbohydrates, bacteria and enzymes.

Abtech BPG Ex Junction Boxes - Features

  • Available in 16 sizes produced in glass reinforced polyester (GRP)
  • Certified for use in Zone 1 and 2 Hazardous Areas
  • UL, CSA, IECEx, ATEX, InMetro and GOST Approvals
  • Ideal for Petrochemical Applications
  • Ingress Protection up to IP67
  • Shell / ERA Deluge Tested and Approved
  • Fire Resistant to IEC 331 (750°C (1382°F) for 3 hours) and also BS6387/1983 (950°C (1742°F) for 3 hours - flame only).*
  • Wide Operating Temperature (- 70°C to + 130°C) (-94°F to +266°F)
  • Excellent mechanical strength and life expectancy
  • Good alternative to aluminium or cast iron
  • Impact Resistant > 7Nm
  • UV Resistant
  • Can be drilled and tapped to accommodate most thread forms (eg NPT)
  • Suitable for applications requiring LSOH (low smoke zero halogen) material.
  • Junction Box material is thick enough to allow tapped entry holes to be machined in the walls.

* Fire Resistance is based on enclosure being futted with ceramic terminals.

Abtech BPG Ex Enclosures - Further Details

Please refer to the individual product pages and data sheets in this section for further details of the Abtech BPG Ex Enclosures or please contact us with your requirements at: technical@cable-jointing.com

Abtech BPG Ex Enclosures - Price and Availability

Alternatively for pricing and stock availability please contact us at sales@cable-jointing.com

© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media