Abtech ATEX Hazard Area Steel Enclosures Zone 1 Zone 2 (SX)

Abtech ATEX Hazard Area Steel Enclosures Zone 1 Zone 2 (SX)

Stainless Steel and Mild Steel Ex Enclosures

Abtech Zone 1 and Zone 2 Hazardous Area Junction Boxes

These Abtech Stainless Steel Ex Junction Boxes are available in 14 sizes of enclosure manufactured in either mild steel or stainless steel. 11 sizes of Abtech Ex Enclosure are available in depths of 140 or 200mm and 8 sizes are available in depths of 140, 200 or 300mm.

Abtech SX Stainless Steel and Mild Steel Ex Enclosures - Features

  • Ideal solution for Marine and Petrochemical applications with Zone 1 and Zone 2 Certification.
  • UL, CSA, IECEx, ATEX, FM, InMetro and GOST Approved.
  • ATEX EEx‘e’ to BS EN 50019 (Zone 1 & 2).
  • ATEX EEx‘nA’ to BS EN50021 (Zone 2).
  • NEMA 4X (CSA, UL & FM class 1, div 2) and GOST.
  • Wide Operating Temperature (from - 70°C to + 175°C) (-94°F to +347°F).
  • Rated to IP66, IP67.
  • Available up to IP68 for depths up to 120 ft (Please contact us for details).
  • Shell / ERA Deluge Tested and Approved
  • Fire Resistant rated to IEC 331 (750°C (1382°F) for 3 hours) and also BS6387/1983 (950°C (1742°F) for 3 hours ) *
  • Impact Resistant > 10 Nm.
  • Corrosion Resistant.
  • Gland plates can be fitted to any or all four sides (size SX66 and above).
  • Can be supplied fitted with any component approved terminal to apparatus level or can be supplied empty as component approved for the clients own certification requirements. Please contact us for further details.
  • Abtech SX Stainless Steel and Mild Steel Enclosures cover 14 sizes.
  • Most can be fitted with removable gland plates on some or all of the four sizes.
  • Hinged, lift-off door, fixed using at least 4 captive stainless steel screws which maintain the correct compression on the gasket.
  • Lift-off door hinges in solid block, machined oversize allowing screws to control door closure, rather than the hinge, leaving its only function to support the door when opened. Door hinges facilitate simple removal of the door and less than 10 deg. opening is required prior to removal.

* Fire Resistance is based on enclosure being futted with ceramic terminals.

Abtech Stainless Steel and Mild Steel Ex Enclosures - Further Details

Please refer to the individual product pages and data sheets in this section for further details of the Abtech Stainless Steel and Mild Steel Ex Junction Boxes or please contact us with your requirements at: technical@cable-jointing.com

Abtech Stainless Steel and Mild Steel Ex Enclosures - Price and Availability

Alternatively for pricing and stock availability please contact us at sales@cable-jointing.com


© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media