Oil Gas and Petrochemical

Earthing Junction Clamps

Square Tape Junction Clamps for Electrical Earthing 

Square tape earth junction clamps are designed for a four way connection and are suitable for crossing over tapes, straight through joints or ‘T’ connections to form a continuous network of tapes. The base has a countersunk hole in the middle for fixing the earth clamp in place.

Earthing Tape Test Clamps

Screw Down Earth Tape Test Clamps for Electrical Earthing

The Screw Down Earth Tape Test Clamps are designed to join 25x3 conductor tape to facilitate in the annual testing of the lightning protection system. The heavy duty lid simply screws onto and off the threaded base.

Earth Tape Test Clamps, Screw Down, Range

Screw Earthing Tape Test Clamps are available as detailed below.

Earthing Tape Test Clamps

Plate Type Earth Tape Test Clamps for Electrical Earthing

These Plate Type Earth Tape Test Clamps are used to form a disconnecting joint between the down conductor system and the earthing system. The conductors are secured by the top and bottom plates being clamped together.

Earth Tape Test Clamps, Plate Type Range

Plate Type Earth Tape Test Clamps are available as detailed below.

Earthing Tape Test Clamps

Oblong Earth Tape Test Clamps for Electrical Earthing

These Oblong Earth Tape Test Clamps are designed to join conductor tape to facilitate in the annual testing of the lightning protection system. These are also commonly referred to as Earthing Junction Clamps. The clamp is designed to allow the conductor to be overlapped and secured using bolts.

Earth Tape Test Clamps, Oblong, Range

Oblong Earthing Tape Test Clamps are available as detailed below.

Earth Clamps

U-Bolt Type Rod to Tape Clamps for Electrical Earthing

U-Bolt Type Rod to Tape Clamps are earth clamps that are designed to join various sizes of conductor tape to the earth electrode.

These Earth Clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

U-Bolt Type Rod to Tape Earth Clamps - Range

Rod to Tape Earth Clamps are available in various sizes as detailed below.

Earth Rod Clamps

JAB Type Rod to Cable Clamps for Electrical Earthing

Earth Rod to Earth Cable Clamps of the JAB type are electrical earthing clamps that are designed to join various sizes of cable to the earth electrode.

These JAB Type Rod to Cable Earth Clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

Earth Rod Clamps, Rod to Cable, JAB Type Range

Rod to Cable Earth Clamps in the JAB Type are available in various sizes as detailed below.

Earth Rod Clamps

GUV Type Rod to Cable Clamps for Electrical Earthing

GUV Type Rod to Cable Clamps are earth clamps that are designed to join various sizes of cable to the earth electrode, rebar, etc.

These GUV Type Rod to Cable Earth Clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

Earth Rod Clamps, Rod to Cable, GUV Type, Range

Rod to Cable Earth Clamps in the GUV Type are available in various sizes as detailed below.

Earth Rod Clamps

A Type Rod to Tape Clamps for Electrical Earthing

A Type Rod to Tape Clamps are earth clamps that are designed to join various sizes of conductor tape to the earth electrode.

These Earth Clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

A Type Rod to Tape Earth Clamps - Range

Rod to Tape Earth Clamps are available in various sizes as detailed below.

Earthing Inspection Pits