Street Lighting and Traffic

Resin Cable Joints IP68 Junction Boxes Slot Cutting Resins Feeder Pillars Cabinet Base Sealants

Copperbond Earth Rods

Earth Rods

Pure Copper Earth Rods Bonded to Steel Core

Copperbond earth rods, when deep driven, usually provide the most cost effective earth system.

These Earth Rods are made from a low carbon, high tensile strength (600n/mm² minimum) steel core with a coating of molecular bonded 99.9% pure electrolytic copper.

Extendable type rods have a rolled thread (UNC2A) at each end.

Rolled threads have a higher strength than cut threads and also preserve the copper coating at the thread roots.

Bespoke Earth Bars, Custom Earth Bars

Earth Bars Made to Order

Custom Copper Earth Bars - Overview

We can offer an Earth Bar custom design and manufacturing service based on you specific requirements and in line with your specifications. 

Custom Earth Bar Design Options

Earth bars can be produced to meet almost every application. Examples of this are as follows:

Earth Bar Feature

Twin Linked Earth Bars

Earth Bars with Twin Disconnecting Link

Copper Earth Bars 6 Way to 12 Way

Supplied with a twin disconnecting link. Offer a method of providing a common earth point. 

Twin linked earth bars are used to provide a temporary break in the connection to the earth. This allows the inspection and testing of multiple earth rods and earthing systems while disconnected from the lightning and earth system. 

Available in 6 way, 8 way, 10 way and 12 way designs. Other sizes and configurations available on request.

Single Linked Earth Bars

Earth Bars with Single Disconnecting Link

Copper Earth Bars 6 Way to 12 Way

Supplied with a single disconnecting link. Offer a method of providing a common earth point. 

Single linked earth bars are used to provide a temporary break in the connection to the earth. This allows the inspection and testing of multiple earth rods and earthing systems while disconnected from the lightning and earth system. 

Available in 6 way, 8 way, 10 way and 12 way designs. Other sizes and configurations available on request.

Standard Earth Bars

Earth Bars without Disconnect Link

Copper Earth Bars 6 Way to 12 Way

These standard earth bars are available in 6 Way, 8 Way, 10 Way and 12 Way designs and are supplied without a disconnect link. These earth bars offer an efficient and convenient way of providing a common earth point. Our standard 6 Way to 12 Way Earth Bars are supplied with 50x6mm copper bar, M10 brass connection bolts, mounted on insulators and powder coated steel base as standard. The following Earth Bar configurations are available in our standard range.

Copper Earth Mats

Earthing Mats

These Earth Mats are are a lower cost option to the solid plates and when used with Bentonite, they provide a long lasting earth solution.

Copper Earth Mats - Material

These Lattice Copper Earth Mats are produced to BS EN 13601 (formerly BS 1432).

Copper Earth Mats - Range

Please see the link below for further details of sizes available of the lattice copper earth mats in our range. If you have a requirement for a different size please contact us and we will be happy to discuss.

Earth Tape Test Clamps

Earth Test Clamps

Test Clamps for Electrical Earthing

Earth Test Clamps are used to facilitate the testing of Electrical Earthing and Lightning Protection Systems and are available in different designs.

Earth Tape Junction Clamps

Junction Clamps

Earth Tape Junction Clamps

Earth Tape Junction Clamps are designed to create joints for earth tapes. They are used for crossing over tapes, or for creating straight through joints or ‘T’ connections when forming a continuous network of tapes.  

Junction Clamps - Material

These high quality Junction Clamps are produced by Kingsmill Earthing from High Strength Copper Alloy material.

Earth Rod Clamps, Rod to Cable

Earth Rod Clamps

Rod to Cable Earth Clamps

Rod to Cable Earth Clamps are electrical earthing clamps that are designed to join various sizes of conductor tape to the earth electrode.

The Rod to Cable Clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

Earth Rod Clamps, Rod to Tape

Earth Rod Clamps

Rod to Tape Earth Clamps

Rod to Tape Clamps are electrical earthing clamps that are designed to join various sizes of conductor tape to the earth electrode.

These Earth Rod Clamps have a high resistance to corrosion and are mechanically strong to ensure a lasting connection.

Rod to Tape Earth Clamps are available in two types. These are A Type Rod to Tape Earth Clamps and U Bolt Type Rod to Tape Earth Clamps.


© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media