11kV Cold Shrink Cable Joints, Euromold Single Core Straight Joint

11kV Cold Shrink Cable Joints, Euromold Single Core Straight Joint 12CSJ

Euromold 11kV Cold Shrink Straight Cable Joints

Euromold MV HV Cable Jointing Kits for Single Core Medium Voltage Polymeric XLPE Cables

These 11kV Cold Shrink Joints are for jointing copper wire screened polymeric cable

Euromold 11kV Cold Shrink Joints are suitable to be laid in air or for direct burial. 

The MV HV Joints are Fully Screened and Fully Submersible

Euromold 11kV Cold Shrink Cable Joints - 12CSJ Design

Cold-shrinkable 11kV Cable joint comprising of the following components:

  • Extruded triple layer EPDM rubber body.
  • Two layer plate with a semiconductive and a field control mastic layer.
  • Overall protective EPDM cover.
  • Field control mastic.
  • Water sealing mastic.
  • Copper stocking.
  • Self-adhesive copper tape.
  • Traceability tag.
  • Conductor connector (not included in the standard kit. specifications and pricing available on request).

Euromold 11kV Cold Shrink Cable Joints - 12CSJ Technical Characteristics

All Joint Bodies in Euromold 12CSJ Cold Shrink Cable Jointing Kits are tested for AC withstand prior to leaving the factory

Euromold 11kV Cold Shrink Cable Joints - 12CSJ Specifications and Standards

These MV HV Cold Shrink Cable Jointing Kits designed to meet the requirements of CENELEC HD 629.1

Euromold 11kV Cold Shrink Cable Joints - 12CSJ - Data Table

Cold shrink
straight joint
type
L (mm) Voltage Um (kV) Diameter over outer sheath (mm) Diameter over core insulation (mm) Conductor Sizes (sq.mm) (for information only)
max min max min max
12CSJ-2 550 12 46 17 33 70 300

Euromold 11kV Cold Shrink Cable Joints - 12CSJ Selection Guide

Select the part number that corresponds to the cable core insulation diameter using the table below.

Example: The copper wire screened cable is 12 kV, 150 mm2 stranded aluminium with a diameter over core insulation of 22.4 mm. Order a Euromold 12CSJ-2/HSS cold shrinkable joint kit.

Ordering Part Number Conductor Sizes (mm) (For information only) Diameter over core insulation (mm) Diameter over outer sheath (mm)
70 95 120 150 185 240 300
12CSJ-2/HSS 12CSJ-2 17-33 46 (max)

Note: All types of conductor connector can be used but must be within the dimensions specified. Please see product data sheets or contact us to ensure selection of the correct conductor connector for the appropriate dimensions

Euromold 11kV Cold Shrink Cable Joints - 12CSJ-2/HSS Jointing Kit Contents

  • 1 x 12CSJ-2 Cold-shrinkable cable joint body
  • 1 x Heat shrinkable joint cover
  • 1 x Field control mastic plate
  • 2 x Field control mastic strip
  • 1 x Roll of copper mesh tape
  • 1 x Mechanical connector for screen continuity

The 11kV Cable Joint kit 12CJS-2/HSS also includes the following

  • Pulling hook
  • Adhesive tape
  • Water sealing mastic
  • Traceability tag
  • Lubricant
  • Wipers
  • Gloves
  • Installation instructions.
For pricing and availability of the Euromold 11kV Cold Shrink Cable Joints 12CSJ please contact us

© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media