11kV Cold Shrink Cable Joints, Euromold Three Core Straight Joint TT-12CSJ

11kV Cold Shrink Cable Joints, Euromold Three Core Straight Joint TT-12CSJ

Euromold 11kV Cold Shrink Straight Cable Joints (12kV)

Euromold MV Cable Jointing Kits for Three Core Medium Voltage Polymeric XLPE Cables

11kV Cold Shrink Straight Joints suitable for direct burial. 

The Medium Voltage Three Core Joints are Fully Screened and Fully Submersible

Euromold 11kV Cable Joints - TT-12CSJ Technical Characteristics

All Joint Bodies in Euromold TT-12CSJ Cold Shrink Cable Jointing Kits are tested for AC withstand prior to leaving the factory

The 11kV Cable Joint can accommodate all different armouring and screen connection systems

Extra water sealing system is available for these 11kV Straight Cable Joints

Euromold 11kV Cable Joints - TT-12CSJ Design

The Euromold TT-12CSJ Cold Shrink Joint comprises of the following components:

  • Extruded double layer silicone body.
  • Field control mastic plate.
  • Field control mastic.
  • Copper stocking or mesh.
  • Conductor connector (not included in the standard kit. specification and pricing available on request).
  • Roll springs.
  • Screen and armour continuity (adapted to the specific needs of the joint depending on cable design).
  • Overall protective cover, can be: (a) Heat Shrinkable, (b) Poured Resin or, (c) Resin Injected Tape
  • Water sealing system (if required).

Euromold 11kV Cable Joints - TT-12CSJ Specifications and Standards

These MV Cold Shrink Cable Jointing Kits are designed to meet the requirements of CENELEC HD 629.1

Euromold 11kV Cable Joints - TT-12CSJ - Data Table

Cold Shrink 3 Core
Straight Joint

 
Voltage Um (kV) Diameter over core insulation (mm) Conductor Sizes (sq.mm) (for information only)
min max min max
TT-12CSJ-2 12 17 33 70 300

Euromold 11kV 3 Core Cable Joints - TT-12CSJ Selection Guide

To order a Three Core Straight Joint for 11kV Cables, please specify TT-12CSJ-2 and add the code corresponding to the type of cover required using the data tables below.

Please indicate the earth connection required for the 11kV Joint and provide the cable data sheet from the cable manufacturer for screening and, or armour connections solutions. Please contact us for further details if required.

Example: The Three Core Cable with individual copper tape screen is 12kV 3 x 150sq.mm stranded aluminium, without armour (with a diameter over core insulation of 23.3mm and over outer sheath 59.8 mm) and a tape injected resin cover is required. Please order a TT-12CSJ-2/TIR Cold Shrink Cable Jointing Kit.

11kV (12kV) Cable Joint Conductor Sizes (mm) (For information only) Diameter over core insulation (mm)
70 95 120 150 185 240 300 min max
TT-12CSJ-2/X TT-12CSJ-2/X 17 33

Note: All types of conductor connector can be used but must be within the dimensions specified. Please see product data sheets or contact us to ensure selection of the correct conductor connector for the appropriate dimensions

Please refer to the below Table to select the required 11kV Cable Joint Cover Type (X)

11kV (12kV) Cable Joint Cover Description of 11kV (12kV) Joint Cover Type
/HSS The joint will be supplied with a heat-shrinkable cover
/TIR The joint will be supplied with a taped injected resin cover
/PBR The joint will be supplied with a poured resin box cover

11kV Cable Joints - TT12CSJ-2/X Jointing Kit Contents

  • 3 x 12CSJ-2 Cold-shrinkable cable joint body
  • 3 x Field control mastic plate
  • 6 x Field control mastic
  • 3 x Roll of copper mesh tape
  • Depending on the Type of Screen, The Cable Armour and the outer protection required, the necessary components will be included in the 11kV Cable Joint kit

The 11kV Cable Joint kit TT-12CJS-2/X also includes the following

  • Pulling hook
  • Adhesive tape
  • Roll Springs
  • Water sealing mastic
  • Lubricant
  • Wipers
  • Installation instructions.
For pricing and availability of the Euromold 11kV Cold Shrink Cable Joints TT-12CSJ please contact us

© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media