11kV Cold Shrink Termination Indoor Terminations - 3 Core - Euromold T-ITK

11kV Cold Shrink Termination Kits - Indoor Terminations 3 Core - Euromold T-ITK

Medium Voltage Indoor Termination suited for 11kV Polymeric Insulated Three Core Cables

These Cold Shrink Termination Kits for 11kV Cables are high quality and for indoor use.

Euromold T-ITK Indoor Terminations will provide a necessary seal against moisture penetration and a perfect electrical field control.

11kV Cold Shrink Termination Kits - Euromold T-ITK Design (See Indoor Termination diagram)

11kV Indoor Termination comprising of the following components:

1. Cable lugs (not included in the standard kit. price and specification available on request).
2. Water sealing mastic.
3. Silicone rubber tubes.
4. Stress control mastic.
5. Conductive EPDM ring.
6. Silicone rubber protection tubes.
7. Break-out.
8. Flexible tinned copper braid (for use with individual metal tape screened cables).

11kV Cold Shrink Termination Kits - Euromold T-ITK Specifications and Standards

Cold Shrinkable Terminations designed to meet the requirements of CENELEC HD 629.1

11kV Cold Shrink Termination Kits - Euromold T-ITK Selection Guide (See Indoor Termination Diagram)

Select the part number corresponding to both the system voltage and the cable insulation diameter in mm using the table below.

Example: The cable is 12 kV, 3 x 150 mm2 stranded aluminium, with a diameter of 72.0 mm over outer sheath and 23.5 mm over the core insulation. The cable has an individual copper tape screen. Order a T-ITK 12-1 termination kit.

Cold Shrink Termination Type Cold Shrink Termination Reference Voltage Um (kV) Diameter over core insulation "Dia.d" (mm) Diameter over outer sheath "Dia.D" (mm) Conductor sizes (for information only) (sq.mm)
min. max. min. max. min. max.
11kV Cold Shrink Termination - Indoor Euromold T-ITK 12-1 12kV 16 30 48 90 50 240
11kV Cold Shrink Termination - Indoor Euromold T-ITK 12-2 12kV 26 42 68 110 240 400

Note: All commercialised European standard cable lugs can be used. Cable lugs must be within the dimensions specified. Please see product data sheets or contact us to ensure selection of the correct conductor connector for the appropriate dimensions

11kV Cold Shrink Terminations - Euromold T-ITK Kit Contents

  • 3 x Cold Shrink Termination Assembly
  • Water Sealing Mastic
  • 1 x Cold Shrinkable Break-Out
  • 3 x Cold Shrinkable Protection Tube
  • 1 x Pulling Hook

The T-ITK Indoor Termination Kit also includes the following

  • Roll of Adhesive Tape
  • Flexible Copper Braid
  • Installation Instructions
For pricing and availability of the Euromold 11kV Cold Shrink Termination Kits T-ITK please contact us

© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media