11kV Cold Shrink Termination Kits - Indoor Termination - Single Core- NexansITK

11kV Cold Shrink Termination Kits - Indoor Terminations Single Core - Nexans ITK

Medium Voltage Termination Kits for Indoor use with 11kV Single Core Polymeric XLPE Cables

These Cold Shrink Termination Kits for 11kV Cables are high quality and supplied in a set of three.

Nexans ITK Indoor Terminations are used to connect single core polymeric insulated cable to equipment.

Cold Shrink Termination Kits for Single Core MV Cables for use indoors in controlled environmental conditions and subject to light condensation.

11kV Cold Shrink Termination Kits - Nexans ITK Design (See Indoor Termination diagram)

11kV Indoor Termination comprising of the following components:

1. Cable lug (not included in the standard kit. price and specification available on request).
2. Water sealing mastic.
3. Silicone tube.
4. Stress control mastic.
5. Conductive EPDM ring.

11kV Cold Shrink Termination Kits - Nexans ITK Specifications and Standards

These MV Cable Terminations designed to meet the requirements of CENELEC HD 629.1

11kV Cold Shrink Termination Kits - Nexans ITK Selection Guide

Select the part number corresponding to both the system voltage and the cable insulation diameter in mm using the table below.

Example: The copper wire screened cable is 12 kV, 150 mm2 stranded aluminium with a diameter over core insulation of 26.2 mm. Order a Nexans 3 x ITK 212 cold shrinkable termination kit.

Cold Shrink Termination Type Cold Shrink Termination Reference Cable Type Voltage Um (kV) Strike Distance "L" (mm) Diameter over core insulation (mm) Conductor sizes (sq.mm)
min. max. min. max.
11kV Cold Shrink Termination - Indoor Nexans 3 x ITK 212 Single Core Polymeric Cable 12kV 260 14 33 50 400
11kV Cold Shrink Termination - Indoor Nexans 3 x ITK 312 Single Core Polymeric Cable 12kV 300 30 50 400 1000

Note: All commercialised European standard cable lugs can be used. Cable lugs must be within the dimensions specified. Please see product data sheets or contact us to ensure selection of the correct conductor connector for the appropriate dimensions

11kV Cold Shrink Terminations - Nexans ITK Kit Contents

  • 3 x factory pre-assembled silicone tubes comprising stress relief and sealing mastic
  • The kit also includes water sealing mastic and installation instructions
For pricing and availability of the Nexans 11kV Cold Shrink Termination Kits ITK please contact us

© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media