11kV Cold Shrink Termination Kits - Outdoor Termination - 3 Core Nexans T-OTK

11kV Cold Shrink Termination Kits - Outdoor Termination Three Core Nexans T-OTK

Medium Voltage Outdoor Termination suited for 11kV Polymeric Insulated Three Core Cables

These Cold Shrink Termination Kits for 11kV Cables are high quality and for outdoor use.

Euromold T-OTK Outdoor Terminations will provide a necessary seal against moisture penetration and a perfect electrical field control.

11kV Cold Shrink Termination Kits - Euromold T-OTK Design (See Outdoor Termination diagram)

11kV Outdoor Termination comprising of the following components:

1. Cable lugs (not included in the standard kit. pricing and specification available on request).
2. Water sealing mastic.
3. Silicone rubber tubes with sheds.
4. Silicone rubber tubes.
5. Stress control mastic.
6. Conductive EPDM ring.
7. Silicone rubber protection tubes.
8. Break-out.
9. Flexible tinned copper braid (for use with individual metal tape screened cables).

11kV Cold Shrink Termination Kits - Euromold T-OTK Specifications and Standards

Clod Shrinkable Terminations designed to meet the requirements of CENELEC HD 629.1

11kV Cold Shrink Termination Kits - Euromold T-OTK Selection Guide (See Outdoor Termination Diagram)

Select the part number corresponding to both the system voltage and the cable dimensions in mm using the table below.

Example: The cable is 12 kV, 3 x 150 mm2 stranded aluminium, with a diameter of 72.0 mm over outer sheath and 23.5 mm over the core insulation. The cable has an individual copper tape screen. Order a T-OTK 12-1 termination kit.

Cold Shrink Termination Type Cold Shrink Termination Reference Voltage Um (kV) Diameter over core insulation "Dia.d" (mm) Diameter over outer sheath "Dia.D" (mm) Conductor sizes (for information only) (sq.mm)
min. max. min. max. min. max.
11kV Cold Shrink Termination - Outdoor Euromold T-OTK 12-1 12kV 16 30 48 90 50 240
11kV Cold Shrink Termination - Outdoor Euromold T-OTK 12-2 12kV 26 42 68 110 240 400

Note: All commercialised European standard cable lugs can be used. Cable lugs must be within the dimensions specified. Please see product data sheets or contact us to ensure selection of the correct conductor connector for the appropriate dimensions

11kV Cold Shrink Terminations - Euromold T-OTK Kit Contents

  • 3 x Cold Shrink Termination Assembly
  • Water Sealing Mastic
  • 1 x Cold Shrinkable Break-Out
  • 3 x Cold Shrinkable Protection Tube
  • 1 x Pulling Hook

The T-OTK Outdoor Termination Kit also includes the following

  • Roll of Adhesive Tape
  • Flexible Copper Braid
  • Installation Instructions
For pricing and availability of the Euromold 11kV Cold Shrink Termination Kits T-OTK please contact us

© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media