Bicon Cable Cleats - Aluminium Multicleats for Single Cables 36mm-120mm

Bicon Cable Cleats - Aluminium Multicleats for Single Cables 36mm-120mm

Bicon Multicleat and Multistrap System

Bicon Aluminium Cable Cleats for Single Cables with Diameter 36mm-120mm

Overview of the Aluminium Multicleat and Multistrap System

Bicon Multicleat Aluminium Cable Cleats are manufactured by the Prysmian Group following their acquisition of BICC Cables.

The Bicon Aluminium Multicleat and Multistrap Cable Cleat is a versatile Cable Clamp System that can be used on all types of cable routes and uses non magnetic materials throughout.

Exceptional overlapping ranges.

Operating temperature -60ºc to +100ºc. See also Fire Resistance properties below.

Bicon Multicleat Aluminium Cable Cleat - Overview

These Multicleat Aluminium Cable Cleats may be used to anchor single cables or bundles of cables to cable supports.

Bicon Multicleat Aluminium Cable Cleat - Selection Guide for Single Cables

Multicleat Aluminium Cable Cleat Reference Number (Please replace ** with appropriate number) Cable Diameter (mm)
Aluminium Cable Cleat Standard 378AB** Epoxy Coated Aluminium Cable Cleat Standard 378AD** Aluminium Cable Cleat Heavy Duty 378AB** Epoxy Coated Aluminium Cable Cleat Heavy Duty 378AD** Min. Max.
378AB01 378AD01 378AB51 378AD51 36 65
378AB02 378AD02 378AB52 378AD52 60 85
378AB03 378AD03 378AB53 378AD53 80 90
378AB04 378AD04 378AB54 378AD54 85 110
378AB09 378AD09 378AB59 378AD59 105 120
-   378AB29 378AD29 85 110

Please refer to relevant wiring regulations and industry standards for recommended cleat spacings, or contact us for further information.

Bicon Multicleat Cable Cleat Base - Selection Guide for Single Cables

Bicon Multicleat Cable Cleat bases are available with either Single Bolt Fixing or Two Bolt Fixing

Bicon Multicleat bases are available in a variety of materials and finishes

The Bicon Multicleat Single Cable Cleat bases can be supplied as follows:

  • Aluminium Alloy, Plain or Epoxy Coated Cable Cleats in a Two Bolt Fixing design as detailed on this page.
  • Stainless Steel Cable Cleats, in a Single Bolt Fixing or Two Bolt Fixing design. See our Bicon Multicleat Stainless Steel Cable Cleat section for details.
  • Cast Iron, Hot Dip Galvanised or Epoxy Coated Multicleat Cable Cleats in a Two Bolt Fixing design. See our Multicleat Cast Iron Cable Cleats (Epoxy Coated or Galvanized) section for details.

Please refer to the table below to select the appropriate Multicleat Cable Cleat Base to suit the installation requirements / conditions.

Bicon Multicleat Base with Single Bolt Fixing Bicon Multicleat Base with Two Bolt Fixing Bicon Multicleat Cable Cleat Reference Bicon Multicleat Base Reference
  Aluminium Alloy - Plain 378 AB**
  Aluminium Alloy - Epoxy Coated 378 AD**
  Stainless Steel - Plain 378 JB**
Stainless Steel - Plain   378 PF**
  Cast Iron - Galvanised 378 CB**
  Cast Iron - Epoxy Coated 378 CD**

Bicon Multistrap - Overview

A Bicon Multistrap is a Multicleat without a Base. The Bicon Multistrap is supplied complete with a tensioning clip, securing pin and winding key all made from highly corrosion resistant non-magnetic stainless steel

Bicon Multistraps are used as an intermediate cable restraint between Multicleat Cable Cleats

Bicon Multistraps may be used to bind cables together

Bicon Multistraps are supplied in two strengths:-

  • Standard Duty, designed to have 2 loops of 0.38 mm thick strap around the cables
  • Heavy Duty, designed to have 3 loops of 0.38 mm thick strap around the cables

Bicon Multistrap - Selection Guide

Multistrap Reference Number Cable Diameter (mm)
Standard 377AB** Heavy 377AB** Min. Max.
01 51 36 65
02 52 60 85
03 53 80 90
04 54 85 110

For Bicon Multicleat style 09 and 59 in the table below, please use Multistrap style 05 and 55 respectively.

LSF Liners for use with Bicon Multistraps

Low Smoke and Fume (LSF) liners can be supplied upon request for use with Bicon Multistraps and conform to BS6853.

Ordering details for LSF Liners to be used with Bicon Multistraps are as follows:

  • 377LSF01 for styles 01 to 04 incl. and 51 to 54 incl.
  • 377LSF02 for styles 05-09 incl., 29-37 incl. and 55-59 incl.

Fire Resistance Properties of the Bicon Multicleat and Multistrap System

Bicon Multistraps with either Cast Iron or Stainless Steel bases will survive an excursion to +1000ºc for up to 2 hours. However, any protective coating of the Cast Iron base of the Cable Cleat could be adversely affected.

Multicleat and Multistrap are registered trademarks of Prysmian under their Bicon brand of Cable Cleats and Cable Clamps.

Important Note : To ensure adequate restraint, Multistraps must be used at the mid-point between Multicleats on all horizontal and vertical straight runs.

Please download the PDF data sheet below for further information.

For price and availability of the Bicon Aluminium Multicleat and Multistrap System for Single Cables please contact us. 

© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media