CMP Barrier Glands - PX2KPB Ex Cable Gland (Ex d, Ex e, Ex nR)

CMP Barrier Glands - PX2KPB Ex Cable Gland for Lead (LS), Armoured Cables (Ex d, Ex e, Ex nR)

CMP PX2KPB Barrier Cable Gland for all types of Lead Sheathed and Armoured Cables in Hazardous Areas.

CMP PX2KPB Compound Barrier Cable Glands are triple certified Flameproof Ex d, Increased Safety Ex e and Restricted Breathing Ex nR for use in Zone 1, Zone 2, Zone 21 and Zone 22 Hazardous Area installations.

CMP PX2KPB Compound Barrier Cable Glands - Triple Certified (Ex d, Ex e, Ex nR) - Features

The PX2KPB Compound Barrier Glands are Flameproof (Type ‘d’), Increased Safety (Type ‘e’) and Restricted Breathing (Type ‘nR’).

The PX2KPB Cable Gland provides a compound barrier seal around the cable conductors and an environmental seal on the outer sheath of the cable.

PX2KPB cable glands allows mechanical cable retention and electrical continuity via cable armour termination, together with earth bonding of the inner Lead Covering or Lead Sheath.

All CMP PX2KPB Cable Connectors are EMC Tested.

For operations such as maintenance and change out, the CMP PX2KPB Cable Glands include a combined detachable armour cone and compound tube, and also the CMP AnyWay universal clamping ring arrangement. This means that the cable can be disconnected from equipment with ease and reconnected just as easily. For installations where the termination needs to be conducted in areas of restricted access or in confined spaces these features also facilitate remote make off procedures.

The CMP PX2KPB cable gland is suitable for use with all forms of equipment protection permitted in Zone 1, Zone 2, Zone 21 & Zone 22 Hazardous Areas, subject to the prevailing code of practice for selection and installation being observed, e.g. IEC 60079-14.

CMP PX2KPB Cable Glands are supplied in a kit including two detachable armour cones. A stepped armour Cone is suitable for SWA cables and a Grooved armour Cone is suitable for all other approved armoured cables.

Note: For Steel Wire Armour Cables refer to PX2KWPB. For all other Armoured Cable types refer to PX2KXPB.

CMP PX2KPB Barrier Cable Glands (Ex d, Ex e, Ex nR) – Metric

Cable Gland Size

Available Entry Threads "C"

Min Thread Length "E"

No. Of Cores

Dia. Over Cond. "A"

Overall Cable Dia. "B"

Across Flats "D"

Across Corners "D"

Prot. Length "F"

Std.

Opt.

Max

Max

Min

Max

Max

Max

Metric

NPT

NPT

20S/16

M20

1/2"

3/4"

15.0

11

12.6

6.1

11.5

30.5

32.9

58.5

20S

M20

1/2"

3/4"

15.0

11

12.6

9.5

15.9

30.5

32.9

58.5

20

M20

1/2"

3/4"

15.0

21

12.6

12.5

20.9

30.5

32.9

60.5

25S

M25

3/4"

1"

15.0

38

17.5

14.0

22

37.5

40.5

67.5

25

M25

3/4"

1"

15.0

38

17.5

18.2

26.2

37.5

40.5

67.5

32

M32

1"

1 1/4"

15.0

59

23.6

23.7

33.9

46.0

49.7

69.5

40

M40

1 1/4"

1 1/2"

15.0

89

30.0

27.9

40.4

55.0

59.4

78.0

50S

M50

1 1/2"

2"

15.0

115

36.6

35.2

46.7

60.0

64.8

75.5

50

M50

2"

2 1/2"

15.0

115

41.0

40.4

53.1

70.0

75.6

80.5

63S

M63

2"

2 1/2"

15.0

140

47.9

45.6

59.4

75.0

81.0

91.5

63

M63

2 1/2"

3"

15.0

140

53.7

54.6

65.9

80.0

86.4

92.0

75S

M75

2 1/2"

3"

15.0

140

59.9

59.0

72.1

89.0

96.1

99.0

75

M75

3"

3 1/2"

15.0

140

64.3

66.7

78.5

99.0

106.9

102.0

90

M90

3"

3 1/2"

15.0

140

75.3

76.2

90.4

114.0

123.1

120.0

100

M100

4"

-

15.0

200

85.6

86.1

101.5

133.0

143.6

135.0

 

Cable Gland Size

Armour Range +

Ordering Reference (Brass Metric) #

PVC Shroud Ref*

Cable Gland Weight (Kgs)

Grooved Cone

Stepped Cone

Min

Max

Min

Max

20S/16

0.0

1.0

0.9

1.0

20S16PX2KPB1RA

PVC06

0.200

20S

0.0

1.0

0.9

1.25

20SPX2KPB1RA

PVC06

0.200

20

0.0

1.0

0.9

1.25

20PX2KPB1RA

PVC06

0.230

25S

0.0

1.0

1.25

1.6

25SPX2KPB1RA

PVC09

0.330

25

0.0

1.0

1.25

1.6

25PX2KPB1RA

PVC09

0.330

32

0.0

1.0

1.6

2.0

32PX2KPB1RA

PVC11

0.510

40

0.0

1.0

1.6

2.0

40PX2KPB1RA

PVC15

0.720

50S

0.0

1.0

2.0

2.5

50SPX2KPB1RA

PVC18

0.825

50

0.0

1.0

2.0

2.5

50PX2KPB1RA

PVC21

0.860

63S

0.0

1.0

2.0

2.5

63SPX2KPB1RA

PVC23

1.450

63

0.0

1.0

2.0

2.5

63PX2KPB1RA

PVC25

1.600

75S

0.0

1.0

2.0

2.5

75SPX2KPB1RA

PVC28

2.300

75

0.0

1.0

2.5

3.0

75PX2KPB1RA

PVC30

3.050

90

0.0

1.6

3.0

3.5

90PX2KPB1RA

PVC32

5.000

100

0.0

1.6

3.15

4.0

100PX2KPB1RA

LSF33

6.000

Dimensions stated for the above CMP Ex Cable Glands in metric sizes are in millimetres unless otherwise stated.

CMP PX2KPB Barrier Cable Glands (Ex d, Ex e, Ex nR) - Imperial

Cable Gland Size

Available Entry Threads "C"

Min. Thread Length "E"

No. Of Cores

Dia. Over Cond. "A"

Overall Cable Diameter "B"

Across Flats "D"

Across Corners "D"

Prot. Length "F"

Std.

Opt.

Max

Max

Min

Max

Max

Max

Metric

NPT

NPT

20S/16

M20

1/2"

3/4"

0.591

11

0.496

0.240

0.453

1.201

1.295

2.303

20S

M20

1/2"

3/4"

0.591

11

0.496

0.374

0.626

1.201

1.295

2.303

20

M20

1/2"

3/4"

0.591

21

0.496

0.492

0.823

1.201

1.295

2.382

25S

M25

3/4"

1"

0.591

38

0.689

0.551

0.866

1.476

1.594

2.657

25

M25

3/4"

1"

0.591

38

0.689

0.717

1.031

1.476

1.594

2.657

32

M32

1"

1 1/4"

0.591

59

0.929

0.933

1.335

1.811

1.957

2.736

40

M40

1 1/4"

1 1/2"

0.591

89

1.181

1.098

1.591

2.165

2.339

3.071

50S

M50

1 1/2"

2"

0.591

115

1.441

1.386

1.839

2.362

2.551

2.972

50

M50

2"

2 1/2"

0.591

115

1.614

1.591

2.091

2.756

2.976

3.169

63S

M63

2"

2 1/2"

0.591

140

1.886

1.795

2.339

2.953

3.189

3.602

63

M63

2 1/2"

3"

0.591

140

2.114

2.150

2.594

3.150

3.402

3.622

75S

M75

2 1/2"

3"

0.591

140

2.358

2.323

2.839

3.504

3.783

3.898

75

M75

3"

3 1/2"

0.591

140

2.531

2.626

3.091

3.898

4.209

4.016

90

M90

3"

3 1/2"

0.591

140

2.965

3.000

3.559

4.488

4.846

4.724

100

M100

4"

-

0.591

200

3.370

3.390

3.996

5.236

5.654

5.315

 

Cable Gland Size

Armour Range +

Ordering Reference

PVC Shroud Ref*

Cable Gland Weight (Ozs)

Grooved Cone

Stepped Cone

(Brass Metric) #

 

Min

Max

Min

Max

20S/16

0.000

0.039

0.035

0.039

20S16PX2KPB1RA

PVC06

7.05

20S

0.000

0.039

0.035

0.049

20SPX2KPB1RA

PVC06

7.05

20

0.000

0.039

0.035

0.049

20PX2KPB1RA

PVC06

8.11

25S

0.000

0.039

0.049

0.063

25SPX2KPB1RA

PVC09

11.64

25

0.000

0.039

0.049

0.063

25PX2KPB1RA

PVC09

11.64

32

0.000

0.039

0.063

0.079

32PX2KPB1RA

PVC11

17.99

40

0.000

0.039

0.063

0.079

40PX2KPB1RA

PVC15

25.40

50S

0.000

0.039

0.079

0.098

50SPX2KPB1RA

PVC18

29.10

50

0.000

0.039

0.079

0.098

50PX2KPB1RA

PVC21

30.34

63S

0.000

0.039

0.079

0.098

63SPX2KPB1RA

PVC23

51.15

63

0.000

0.039

0.079

0.098

63PX2KPB1RA

PVC25

56.44

75S

0.000

0.039

0.079

0.098

75SPX2KPB1RA

PVC28

81.13

75

0.000

0.039

0.098

0.118

75PX2KPB1RA

PVC30

107.59

90

0.000

0.063

0.079

0.138

90PX2KPB1RA

PVC32

176.37

100

0.000

0.063

0.124

0.157

100PX2KPB1RA

LSF33

211.64

Dimensions stated for the above CMP Ex Cable Glands in imperial sizes are in inches unless otherwise stated.

NOTE: *CMP SOLO LSF Halogen Free Shrouds also available on request. + Alternative armour clamping range available for non-standard armour sizes. # Other thread forms, materials and finishes are available. IEC Ex & ATEX hazardous area certification marking included as standard. The PX2K/PB is supplied in kit form inclusive if two detachable armour cones. The Stepped Cone (W) is suitable for SWA cables, and the Grooved Cone (X) is suitable for all other approved armoured cables. Please consult CMP for any other requirements.

CMP PX2KPB Barrier Cable Glands (Ex d, Ex e, Ex nR) – Technical Data

Type

PX2K/PB

Design Specification

BS 6121:Part 1:1989, EN 50262:1999

ATEX Certification Detail

SIRA06ATEX1097X, SIRA07ATEX4326X

ATEX Code of Protection Category

ATEX Ex II 2 GD, Ex d IIC, Ex e II, Ex tD A21 IP66, ATEX Ex II 3 G Ex nR II, ATEX Ex  IM2, Ex d I, Ex e I

ATEX Compliance Standards

EN 60079-0, EN 60079-1, EN 60079-7, EN 60079-15, IEC 61241-0, EN 61241-1

IEC Ex Certification Detail

IECEx SIR 06.0044X

IEC Ex Code of Protection Category

Ex d IIC, Ex e II, Ex nR II, Ex tD A21 IP66, Ex d I, Ex e I

IEC Ex Compliance Standards

IEC 60079-0, IEC 60079-1, IEC 60079-7, IEC 60079-15, IEC 61241-0, IEC 61241-1

Continuous Operating Temperature

-60°C to +100°C

Ingress Protection Rating

IP66, IP67, IP68

Ingress Protection Document

5046 C549F

Deluge Protection Compliance

DTS01 : 91

Deluge Protection Document

5046 C549F-D

Cable Gland Material

Brass, Electroless Nickel Plated Brass, Stainless Steel, Aluminium

Seal Material

CMP SOLO LSF Thermoplastic Elastomer / Epoxy Resin Barrier Compound

Material Safety Data Sheet

Hardener / Resin

Cable Type

Lead Sheathed & Single Wire Armour (LC/SWA), Lead Sheathed & Aluminium Wire Armour (LC/AWA), Lead Sheathed & Wire Braid Armour (LC/SWB), Lead Sheathed & Pliable Wire Armour (LC/PWA), Lead Sheathed & Steel Tape Armour (LC/STA), Lead Sheathed & Aluminium Strip Armour (LC/ASA)

Armour Clamping

Detachable Compound Tube / Cone & AnyWay Universal Clamping Ring

Sealing Technique

Unique CMP "LRS" TM Outer Seal (Load Retention Seal)

Sealing Area(s)

Inner Compound Barrier & Outer Sheath

Accessories

Adaptor/Reducer, Earth Tag, Locknut, Serrated Washer, Entry Thread Seal, Shroud

Please Note: If Tape Armour is to be used please contact us for manufacturer guidance.

CMP PX2KPB Barrier Cable Glands (Ex d, Ex e, Ex nR) – Approvals Data

GOST R Certificate Number

POCC GB.HO06.B00207

GOST R Code of Protection Category

Ex d IIC / Ex e II / DIP A21

GOST R Compliance Standards

ГOCT P 52350.0-2005, ГOCT P 52350.1-2005,
ГOCT P 52350.7-2005, ГOCT MЭK 61241-1-1-99

GOST GGTN Permit

PPC 00-40706

GOST K Certificate Number

KZ 75000361 01 01 14761

RoK Permit For Use Number

19-02-UL-1957

DNV Approval No.

E-10496

ABS Approval No.

01-LD234401A/2-PDA

INMETRO Approval Certificate Number.

AEX-10786-X

INMETRO Code of Protection Category

BR - Ex d IIC / BR - Ex e II - IP66

INMETRO Compliance Standards

ABNT NBR IEC 60079-0:2006, ABNT NBR IEC 60079-1:2007, IEC 60079-7:2001 e ABNT NBR IEC 60529:2005

NEPSI Certificate Number

GYJ081070

NEPSI Code of Protection Category

Ex d IIC, Ex e II, Ex nR II, DIP A21 TA

NEPSI Compliance Standards

GB3836.1/2/3-2000, GB3836.8-2003, GB12476.1-2000

Please Contact us for further details: technical@cable-jointing.com


© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media