Euromold Bushing for Oil Insulated Equipment - Interface B 36kV 400A (400-)

Euromold Bushing for Oil Insulated Equipment - Interface B 36kV 400A (400-)

Euromold Oil Insulated Equipment Bushings

Transformer Bushings, Switch Gear Bushings and Capacitor Bushings up to 36kV 400A

Euromold Oil Insulated Equipment Bushings for Interface A connections are suitable for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors etc.

Euromold 400T1, 400AR-1, 400AR-2 Equipment Bushings - Data Table
Euromold Bushing Type Voltage Ur (kV) Current Ir (A) Dimensions (mm) - Refer to diagram above
A B C D E Dia. F Dia. G Dia. H
400T1 12 400 310 144 30 M12 22 88 128 16
K400T1 24 400 310 144 30 M12 22 88 128 16
M400T1 36 400 310 144 30 M12 22 88 128 16
400AR-1 12 400 380 213 30 M12 22 74 128 16
K400AR-1 24 400 380 213 30 M12 22 74 128 16
M400AR-1 36 400 380 213 30 M12 22 74 128 16
400AR-2 12 400 329 138 36 M16 40 100 150 30
K400AR-2 24 400 329 138 36 M16 40 100 150 30
M400AR-2 36 400 329 138 36 M16 40 100 150 30
Euromold 400T1, 400AR-1, 400AR-2 Equipment Bushings - Ordering Instructions

To order the Euromold Bushing you require for your application, please specify the type from the above table.
These Euromold Bushings are supplied with an earth jumper (/J) or an earth plate (/GS). This earth connection must be specified
when ordering. E.g. K400AR-1/J.

For fixings, please refer to the Euromold pdf data sheet below.

Euromold 400T1, 400AR-1, 400AR-2 Equipment Bushings - Features
  • Oil Insulated Transformer Bushings, Switchgear Bushings and Capacitor Bushings for Interface B Connections.
  • These Euromold Plug In Type Equipment Bushings meet the requirements of IEC 137. The (K)(M)400T1 Bushing also meets CENELEC EN 50180.
  • Each Euromold Bushing has been tested for AC withstand and partial discharge prior to leaving the factory.
  • Suitable for use up to 36kV, 400Amps.
Euromold 400T1, 400AR-1, 400AR-2 Equipment Bushings - Additional Technical Data

Please refer to the Euromold pdf data sheet below for more information on the Euromold 400T1, 400AR-1, 400AR-2 Oil Insulated Equipment Bushings.


© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media