Euromold Bushing for Oil Insulated Equipment - Interface C 36kV 1250A (400AR-4)

Euromold Bushing for Oil Insulated Equipment - Interface C 36kV 1250A (400AR-4)

Euromold Oil Insulated Equipment Bushings

Transformer Bushings, Switch Gear Bushings and Capacitor Bushings up to 36kV 1250A

Euromold Oil Insulated Equipment Bushings for Interface C connections are suitable for use in equipment insulated with oil fluid, typically for transformers, switchgear, capacitors etc.

Euromold 400AR-4 Equipment Bushings - Data Table
Euromold Bushing Type Voltage Ur (kV) Current Ir (A)
400AR-4 12 1250
K400AR-4 24 1250
M400AR-4 36 1250
Euromold 400AR-4 Equipment Bushings - Ordering Instructions

To order the Euromold Bushing you require for your application, please specify the type from the above table.
These Euromold Bushings can be supplied with an earth jumper (/J) or and earth plate (/GS). This earth connection must be specified
when ordering if required. E.g. M400AR-4/GS.

For fixings, please refer to the Euromold pdf data sheet below.

Euromold 400AR-4 Equipment Bushings - Features
  • Oil Insulated Transformer Bushings, Switchgear Bushings and Capacitor Bushings for Interface C Connections.
  • These Euromold Bolted Type Equipment Bushings are moulded epoxy insulated parts and meet the requirements of CENELEC EN 50180 and IEC 137.
  • Each Euromold Bushing has been tested for AC withstand and partial discharge prior to leaving the factory.
  • Suitable for use up to 36kV, 1250Amps.
Euromold 400AR-4 Equipment Bushings - Additional Technical Data

Please refer to the Euromold pdf data sheet below for more information on the Euromold 400AR-4 Oil Insulated Equipment Bushings.


© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media