Indoor Termination Kits for 11kV Three Core Polymeric Cables

Indoor Termination Kits for 11kV Three Core Polymeric Cables

Indoor Termination Kit for 11kV Three Core Polymeric Insulated Cables

Euromold Indoor Termination Kits will provide a necessary seal against moisture penetration and a perfect electrical field control.

Euromold Indoor Termination Kits for 3 Core 11kV Cables - Design (See Indoor Termination diagram)

Euromold 11kV Indoor Terminations comprise of the following components:

1. Cable lugs (not included in the standard kit. price and specification available on request).
2. Water sealing mastic.
3. Silicone rubber tubes.
4. Stress control mastic.
5. Conductive EPDM ring.
6. Silicone rubber protection tubes.
7. Break-out.
8. Flexible tinned copper braid (for use with individual metal tape screened cables).

Euromold Indoor Termination Kits for 3 Core 11kV Cables - Specifications and Standards

Indoor Terminations designed to meet the requirements of CENELEC HD 629.1

Euromold Indoor Termination Kits for 3 Core 11kV Cables - Selection Guide (See Indoor Termination Diagram)

Select the part number corresponding to both the system voltage and the cable insulation diameter in mm using the table below.

Example: The cable is 12 kV, 3 x 150 mm2 stranded aluminium, with a diameter of 72.0 mm over outer sheath and 23.5 mm over the core insulation. The cable has an individual copper tape screen. Order a T-ITK 12-1 termination kit.

Indoor Termination Type Indoor Termination Reference Voltage Um (kV) Diameter over core insulation "Dia.d" (mm) Diameter over outer sheath "Dia.D" (mm) Conductor sizes (for information only) (sq.mm)
min. max. min. max. min. max.
Indoor Termination for 3 Core 11kV Cables T-ITK 12-1 12kV 16 30 48 90 50 240
Indoor Termination for 3 Core 11kV Cables T-ITK 12-2 12kV 26 42 68 110 240 400

Note: All commercialised European standard cable lugs can be used. Cable lugs must be within the dimensions specified. Please see product data sheets or contact us to ensure selection of the correct conductor connector for the appropriate dimensions

Euromold Indoor Termination Kits for 3 Core 11kV Cables - Kit Contents

  • 3 x Cold Shrink Termination Assembly
  • Water Sealing Mastic
  • 1 x Cold Shrinkable Break-Out
  • 3 x Cold Shrinkable Protection Tube
  • 1 x Pulling Hook

This Indoor Termination Kit also includes the following

  • Roll of Adhesive Tape
  • Flexible Copper Braid
  • Installation Instructions
For pricing and availability of the Euromold Indoor Termination Kits for 3 Core 11kV Cables please contact us

© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media