Outdoor Termination Kits for 11kV Three Core Polymeric Cables

Outdoor Termination Kits for 11kV Three Core Polymeric Cables

Outdoor Termination Kits for 11kV Polymeric Insulated Three Core Cables

Euromold Outdoor Terminations provide a necessary seal against moisture penetration and a perfect electrical field control.

Euromold Outdoor Termination Kits for 11kV Cables - Specifications and Standards

Outdoor Terminations designed to meet the requirements of CENELEC HD 629.1

Euromold Outdoor Termination Kits for 11kV Cables - Design (See Outdoor Termination diagram)

11kV Outdoor Termination comprising of the following components:

1. Cable lugs (not included in the standard kit. pricing and specification available on request).
2. Water sealing mastic.
3. Silicone rubber tubes with sheds.
4. Silicone rubber tubes.
5. Stress control mastic.
6. Conductive EPDM ring.
7. Silicone rubber protection tubes.
8. Break-out.
9. Flexible tinned copper braid (for use with individual metal tape screened cables).

Euromold Outdoor Termination Kits for 11kV Cables - Selection Guide (See Outdoor Termination Diagram)

Select the part number corresponding to both the system voltage and the cable dimensions in mm using the table below.

Example: The cable is 12 kV, 3 x 150 mm2 stranded aluminium, with a diameter of 72.0 mm over outer sheath and 23.5 mm over the core insulation. The cable has an individual copper tape screen. Order a T-OTK 12-1 outdoor termination kit.

Outdoor Termination Type Outdoor Termination Reference Voltage Um (kV) Diameter over core insulation "Dia.d" (mm) Diameter over outer sheath "Dia.D" (mm) Conductor sizes (for information only) (sq.mm)
min. max. min. max. min. max.
Outdoor Termination for 11kV 3 Core Cables T-OTK 12-1 12kV 16 30 48 90 50 240
Outdoor Termination for 11kV 3 Core Cables T-OTK 12-2 12kV 26 42 68 110 240 400

Note: All commercialised European standard cable lugs can be used. Cable lugs must be within the dimensions specified. Please see product data sheets or contact us to ensure selection of the correct conductor connector for the appropriate dimensions

Euromold Outdoor Termination Kits for 11kV Cables - Kit Contents

  • 3 x Cold Shrink Termination Assembly
  • Water Sealing Mastic
  • 1 x Cold Shrinkable Break-Out
  • 3 x Cold Shrinkable Protection Tube
  • 1 x Pulling Hook

This Outdoor Termination Kit also includes the following

  • Roll of Adhesive Tape
  • Flexible Copper Braid
  • Installation Instructions
For pricing and availability of the Euromold Outdoor Termination Kits for 3 Core 11kV Cables please contact us

© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media