Prysmian Bicon Multicleats - Cable Cleats for Triple LSF and LSOH Cables

Prysmian Bicon Multicleats - Cable Cleats for Triple LSF and LSOH Cables

Prysmian Bicon Multicleat and Multistrap System

Overview of the Multicleat and Multistrap System for Low Smoke Zero Halogen Cables:

Prysmian Bicon Multicleat for Triple LSF and LSOH Cables in Trefoil Formation with Diameter 24mm-145mm

The Prysmian Bicon Multicleat and Multistrap Cable Cleat is a versatile Cable Clamp System that can be used on all types of cable routes and uses non magnetic materials throughout.

Exceptional overlapping ranges.

Operating temperature -60ºc to +100ºc. See also Fire Resistance properties below.

Prysmian Bicon Multistrap - Overview

A Prysmian Bicon Multistrap is a strap complete with a tensioning clip, securing pin and winding key all made from highly corrosion resistant non-magnetic stainless steel

Prysmian Bicon Multistraps are used as an intermediate cable restraint between Multicleat Cable Cleats

Prysmian Bicon Multistraps may be used to bind cables together

Prysmian Bicon Multistraps are supplied in two strengths:-

  • Standard Duty, designed to have 2 loops of 0.38 mm thick strap around the cables
  • Heavy Duty, designed to have 3 loops of 0.38 mm thick strap around the cables

Prysmian Bicon Multistrap for Triple LSF and LSOH Cables in Trefoil Formation - Selection Guide

Multistrap Reference Number Trefoil Cable Diameter (mm)
Standard 377AB** Heavy 377AB** Min. Max.
01 51 24 34
02 52 30 41
03 53 37 47
04 54 43 54
05 55 50 60
06 56 56 67
07 57 63 73
08 58 69 80
  36 72 85
  37 82 95
  38 92 105
  39 102 115
  40 112 125
  41 122 135
  42 132 145

Prysmian Bicon Multicleat Cable Cleat for Triple LSF and LSOH Cables - Overview

A Prysmian Bicon Multicleat is a Multistrap with a base

Single Way Multicleat Cable Cleats may be used to anchor single cables or bundles of cables to cable supports.

Bicon Multicleat Aluminum Cable Cleat - Selection Guide for Triple Cables in Trefoil Formation

Multicleat Cable Cleat Reference Number (Please replace ** with appropriate number) Trefoil Cable Diameter (mm)
Standard 378AB** Heavy 378AB** Min. Max.
01 51 24 34
02 52 30 41
03 53 37 47
04 54 43 54
05 55 50 60
06 56 56 67
07 57 63 73
08 58 69 80
  36 72 85
  37 82 95
  38 92 105
  39 102 115
  40 112 125
  41 122 135
  42 132 145

Please refer to relevant wiring regulations and industry standards for recommended cleat spacings, or contact us for further information.

Prysmian Bicon Multicleat Cable Cleat Base - Selection Guide for Triple LSF and LSOH Cables

Prysmian Bicon Multicleat bases are available with either Single Bolt Fixing or Two Bolt Fixing

Prysmian Bicon Multicleat bases are available in a variety of materials and finishes

The Prysmian Bicon Multicleat bases can be supplied as follows:

  • Aluminium Alloy, Plain or Epoxy Coated Cable Cleats in a Two Bolt Fixing design
  • Stainless Steel Cable Cleats, in a Single Bolt Fixing or Two Bolt Fixing design
  • Cast Iron, Hot Dip Galvanised or Epoxy Coated Cable Cleats in a Two Bolt Fixing design (please contact us)

Please refer to the table below to select the appropriate Multicleat Cable Cleat Base to suit the installation requirements / conditions.

Prysmian Bicon Multicleat Base with Single Bolt Fixing Prysmian Bicon Multicleat Base with Two Bolt Fixing Prysmian Bicon Multicleat LSF LSOH Cable Cleat Reference Prysmian Bicon Multicleat LSF LSOH Cable Cleat Base Reference
  Aluminium Alloy - Plain 378 AB**
  Aluminium Alloy - Epoxy Coated 378 AD**
  Stainless Steel - Plain 378 JB**
Stainless Steel - Plain   378 PF**
  Cast Iron - Galvanised 378 CB**
  Cast Iron - Epoxy Coated 378 CD**

LSF Liners for use with Prysmian Bicon Multistraps

LSF liners can be supplied upon request for use with Prysmian Bicon Multistraps and conform to BS6853.

Ordering details for LSF Liners to be used with Prysmian Bicon Multistraps are as follows:

  • 377LSF01 for styles 01 to 04 incl. and 51 to 54 incl.
  • 377LSF02 for styles 05-09 incl., 29-37 incl. and 55-59 incl.

Fire Resistance Properties of the Prysmian Bicon Multicleat and Multistrap System

Prysmian Bicon Multistraps with either Cast Iron or Stainless Steel bases will survive an excursion to +1000ºc for up to 2 hours. However, any protective coating of the Cast Iron base of the Cable Cleat could be adversely affected.

Multicleat and Multistrap are registered trademarks of Prysmian under their Bicon brand of Cable Cleats and Cable Clamps.

Important Note : To ensure adequate restraint, Multistraps must be used at the mid-point between Multicleats on all horizontal and vertical straight runs.

Please download the PDF data sheet below for further information.

For price and availability of the Prysmian Bicon Multicleat and Multistrap System for Triple Cables in Trefoil Formation please contact us.

© Bonus Power Systems 2011 All Rights Reserved | Webdesign by Vaccine Media